30+ years on Florida's Gulf Coast

TCSThe Cleaning Solution LLC

Brooksville to Naples and everywhere in between on Florida's Gulf Coast

Grout & Tile Restoration and Cleaning in Southwest Florida

Dingy grout restored to a uniform, sealed finish — no replacement needed.

Grout & Tile Cleaning and Sealing in Southwest Florida

What you get

  • Hot-water extraction deep cleaning for ceramic, porcelain and quarry tile
  • Penetrating and color sealing to lock out stains and even out mismatched grout
  • Natural stone care: travertine, marble, saltillo and slate honing and sealing
  • Grout repair and re-grouting for cracked, missing or crumbling lines
  • Shower, backsplash and countertop tile detailing
  • Safe for pets, kids and sealed hardwood transitions
Why this matters in Florida+

Florida tile takes a beating: sand tracked in from the Gulf, humidity, hard water and daily traffic all settle into porous grout lines. Mopping only pushes that soil deeper. We use truck-mounted hot-water extraction at high pressure to pull embedded dirt out of the grout, then seal it so it stays that way.

Step 1 — coverage

Do we cover your area?

Pop in your ZIP and we'll check. We run brooksville to naples and everywhere in between on florida's gulf coast.

Our process

Four steps, one visit

  1. 01

    Free on-site assessment

    We look at tile type, grout condition and existing sealer before quoting a flat price.

  2. 02

    Pre-treat & agitate

    An alkaline cleaner dwells in the grout lines and is scrubbed to break the soil bond.

  3. 03

    High-pressure extraction

    Heated, contained rinse pulls soil and cleaner off the floor — nothing left behind.

  4. 04

    Seal & protect

    Penetrating or color sealer applied once dry so spills sit on top instead of soaking in.

Ready for grout & tile?

Lock in a flat price before we drive out. It takes under a minute and there's no obligation.

Real jobs

Recent grout & tile work

Before and after tile & grout restoration in Bradenton, FL — Ceramic tile, sanded groutBEFORE / AFTER

Bradenton, FL

Tile & Grout Restoration

Surface
Ceramic tile, sanded grout
Problem
Twenty years of traffic had turned light grout lines nearly black through the kitchen and main hall.
Process
Alkaline pre-treatment, line-by-line agitation, heated high-pressure extraction, then color seal.
Result
Uniform grout color restored across the floor — no tile replaced, one day on site.

They made floors that I thought needed replacing look brand new.

Before and after tile & grout cleaning and sealing in Lakewood Ranch, FL — Large-format porcelain, light groutBEFORE / AFTER

Lakewood Ranch, FL

Tile & Grout Cleaning and Sealing

Surface
Large-format porcelain, light grout
Problem
New-build grout was never sealed and had already picked up traffic shading at every doorway.
Process
Deep extraction followed by a penetrating sealer on every line the same visit.
Result
Grout back to its original shade and now sealed against the next few years of traffic.
Before and after shower tile & grout restoration in Sarasota, FL — Ceramic shower walls and panBEFORE / AFTER

Sarasota, FL

Shower Tile & Grout Restoration

Surface
Ceramic shower walls and pan
Problem
Hard water scale and mildew in the grout with failed caulk at the corners.
Process
Scale and soap scum stripped, mildew treated, corner caulk cut out and replaced, grout sealed.
Result
Shower back to a clean, sealed surface that wipes down instead of needing scrubbing.

FAQ

Grout & Tile questions

Can dirty grout actually be cleaned, or does it need replacing?+

In the vast majority of homes we see, the grout is sound and simply saturated with soil. Extraction cleaning restores it. Replacement is only necessary when grout is cracked, hollow or missing, and in those cases we can repair the affected lines.

How long does tile and grout cleaning take?+

Most Florida homes with 400–800 square feet of tile take two to four hours. Floors are walkable almost immediately and fully dry within a few hours.

What is color sealing?+

Color sealing applies a pigmented, stain-blocking coating to the grout lines. It gives every line the same uniform color and blocks future staining — ideal for grout that has permanent discoloration or patchy repairs.

How often should grout be sealed in Florida?+

Every two to three years for most households, sooner in high-traffic entries or homes near the beach where sand is a constant abrasive.

Free estimates, honest pricing, no upsell games

Tell us what floor you're dealing with and we'll give you a straight answer and a flat price.

Call now Free quote