30+ years on Florida's Gulf Coast
Brooksville to Naples and everywhere in between on Florida's Gulf Coast
Brooksville to Naples and everywhere in between on Florida's Gulf Coast
A coating is only as good as the prep — we grind, not acid-wash.
Bare Florida concrete dusts, stains and soaks up every oil drip. A properly prepped epoxy or polyaspartic system seals it permanently and wipes clean. Most peeling floors we get called to fix were rolled over a slab that was never mechanically profiled. We diamond-grind every job. Coatings run $3.00–$5.00 per square foot.
Step 1 — coverage
Our process
Vapor coming up through the slab is the number-one cause of coating failure. We test first.
The slab is ground to a coating-grade profile — no acid etch, no shortcut.
Cracks and pits filled, then the pigmented epoxy basecoat is applied.
Flake broadcast to refusal if chosen, scraped back, then sealed with polyaspartic clear.
Lock in a flat price before we drive out. It takes under a minute and there's no obligation.
Real jobs
BEFORE / AFTERSarasota, FL
FAQ
Nearly always bad prep or slab moisture. Coating over a slick, un-ground slab gives the epoxy nothing to grip. We diamond-grind and moisture-test every floor before coating.
Most residential garages are a two-day job: grind and basecoat day one, topcoat day two. Light foot traffic the next day, vehicles after about five days.
Coatings run $3.00–$5.00 per square foot depending on the system, the flake or metallic finish and how much slab repair is needed.
Yes, with a polyaspartic topcoat. Straight epoxy ambers in UV — polyaspartic holds its color outdoors and cures fast in our humidity.
We cover brooksville to naples and everywhere in between on florida's gulf coast — Tampa Bay, Sarasota-Bradenton, Charlotte County and Southwest Florida.
Dingy grout restored to a uniform, sealed finish — no replacement needed.
Deep extraction cleaning that lifts pet odor, traffic lanes and Florida humidity smells.
We restore the surface, not just rinse it — then seal it so it stays clean through the rainy season.
Bring original mid-century terrazzo back to a mirror finish — for a fraction of replacement.
Scratched, dull or water-marked wood usually needs a refinish — not a tear-out.
Etch marks and dull spots are surface damage — we grind them out and re-polish.
Tell us what floor you're dealing with and we'll give you a straight answer and a flat price.