Brooksville to Naples and everywhere in between on Florida's Gulf Coast
Marble and Natural Stone Polishing
Etch marks and dull spots are surface damage — we grind them out and re-polish.
What you get
- Diamond honing to remove etches, scratches and lippage
- Mirror polish or soft honed matte finish — your call
- Travertine hole filling and grout line repair
- Marble, limestone, granite, saltillo, slate and terrazzo
- Shower walls, countertops, vanities, entries and pool decks
- Impregnating sealer so spills sit on top of the stone
Why this matters in Florida+
Marble, travertine and limestone are soft, and anything acidic — wine, citrus, pool chemicals, the wrong cleaner — eats a dull mark into the surface. No cleaner fixes that. We resurface the stone with diamond abrasives, take it back to a uniform hone or mirror polish, then seal it. Stone restoration runs $3.50–$6.50 per square foot.
Step 1 — coverage
Our process
Four steps, one visit
- 01
Stone ID and test patch
We identify the stone and finish, then polish a small area so you see the result before we commit.
- 02
Grind and hone
Progressive diamond passes flatten etching, scratches and uneven tile edges.
- 03
Polish
Powder polish brings the surface to the exact sheen you approved.
- 04
Seal
Penetrating sealer applied so the stone resists staining without a plastic film.
Ready for marble & stone?
Lock in a flat price before we drive out. It takes under a minute and there's no obligation.
FAQ
Marble & Stone questions
What causes dull white marks on marble?+
Acid etching. Anything acidic chemically eats the polished surface, leaving a dull spot. It is physical damage, not a stain, so it can only be corrected by re-polishing the stone.
Can scratched travertine be repaired without replacing it?+
Almost always. Travertine is soft enough that diamond honing removes surface scratches, and open holes are filled to match before the final finish.
Do you polish granite countertops?+
Yes. Granite is harder than marble, so it takes heavier diamond work, but scratches, dull edges and etched spots around the sink can be restored in place.
How much does marble polishing cost?+
Stone restoration and polishing runs $3.50–$6.50 per square foot depending on the stone, the finish and how much damage there is. We quote a flat price after the test patch.
Marble & Stone service across the Florida Gulf Coast
We cover brooksville to naples and everywhere in between on florida's gulf coast — Tampa Bay, Sarasota-Bradenton, Charlotte County and Southwest Florida.
Other services
Grout & Tile Cleaning and Sealing
Dingy grout restored to a uniform, sealed finish — no replacement needed.
Carpet & Upholstery Cleaning
Deep extraction cleaning that lifts pet odor, traffic lanes and Florida humidity smells.
Pressure Washing & Paver Sealing
We restore the surface, not just rinse it — then seal it so it stays clean through the rainy season.
Terrazzo Restoration & Repair
Bring original mid-century terrazzo back to a mirror finish — for a fraction of replacement.
Hardwood Floor Restoration & Refinishing
Scratched, dull or water-marked wood usually needs a refinish — not a tear-out.
Epoxy & Concrete Floor Coating
A coating is only as good as the prep — we grind, not acid-wash.
Free estimates, honest pricing, no upsell games
Tell us what floor you're dealing with and we'll give you a straight answer and a flat price.