30+ years on Florida's Gulf Coast

TCSThe Cleaning Solution LLC

Brooksville to Naples and everywhere in between on Florida's Gulf Coast

Travertine Restoration, Repair and Sealing in Southwest Florida

Chalky, pitted travertine honed, filled and sealed — not pressure-blasted.

Travertine Cleaning, Repair & Sealing in Southwest Florida

What you get

  • Low-pressure stone-safe cleaning for lanais, pool decks and entries
  • Diamond honing to remove etch marks, scratches and dull spots
  • Hole filling and chip repair blended to the surrounding stone
  • Matte honed, satin or polished finish — your choice
  • Grout and joint repair between travertine pavers and tile
  • Penetrating impregnating sealer, never a topical film that peels
Why this matters in Florida+

Travertine is a soft, porous stone full of natural voids, and Florida is hard on it. Chlorine splash-out, sunscreen, hard rain and acidic cleaners open the pits back up, etch the surface and leave the stone chalky. High-pressure washing makes it worse — it strips the factory fill and permanently roughs the face. We clean at low pressure with stone-safe chemistry, hone out etching and scratches with diamond abrasives, fill the open holes to match, then seal with a penetrating impregnator. Travertine restoration runs $3.50–$6.50 per square foot.

Step 1 — coverage

Do we cover your area?

Pop in your ZIP and we'll check. We run brooksville to naples and everywhere in between on florida's gulf coast.

Our process

Four steps, one visit

  1. 01

    Stone ID and test patch

    We confirm it is travertine, check the existing sealer, and restore a small area so you see the finish before we commit.

  2. 02

    Low-pressure deep clean

    Stone-safe chemistry lifts algae, sunscreen and mineral haze without blasting fill out of the holes.

  3. 03

    Hone and fill

    Diamond passes flatten etching and lippage; open pits and chips are filled and color-matched flush.

  4. 04

    Seal

    A penetrating sealer soaks in so spills, chlorine and rain sit on top instead of staining the stone.

Ready for travertine?

Lock in a flat price before we drive out. It takes under a minute and there's no obligation.

The Cleaning Solution LLC941-592-2667Mon–Sat, 7:00 AM – 6:00 PMGoogle Business Profile

FAQ

Travertine questions

Can travertine be cleaned with a pressure washer?+

It should not be. High pressure strips the factory fill out of the natural holes and leaves the surface permanently rough and chalky. We clean travertine at low pressure with stone-safe chemistry, then fill and seal.

Can chipped or pitted travertine be repaired?+

Yes. Open holes, chips and popped fill are patched with color-matched material and honed flush, so the deck or floor reads as one continuous surface again.

Why does my travertine look dull or have white marks?+

That is acid etching — pool chemicals, citrus, wine or the wrong cleaner chemically eat the surface. It is damage, not a stain, so it is honed out mechanically and then refinished.

Should travertine be sealed in Florida?+

Yes, especially on pool decks and lanais. A penetrating sealer slows algae staining, resists chlorine and sunscreen, and makes routine cleaning far easier. Most Florida travertine needs re-sealing every two to three years.

What does travertine restoration cost?+

Travertine work runs $3.50–$6.50 per square foot depending on the condition, how much hole filling is needed and the finish you want. You get a flat price after the test patch.

Travertine service across the Florida Gulf Coast

We cover brooksville to naples and everywhere in between on florida's gulf coast. Tap your city for local details.

Other services

Free estimates, honest pricing, no upsell games

Tell us what floor you're dealing with and we'll give you a straight answer and a flat price.

The Cleaning Solution LLC941-592-2667 Mon–Sat, 7:00 AM – 6:00 PM Palmetto, FLGoogle Business Profile
Call now Free quote